TL;DR
An unused fireplace opening in an Edwardian London flat has been turned into concealed kitchen storage with a £4 tension rod, hemming tape and curtain clips. The project cost about £12 and took around 30 minutes, according to the account, which says the space now holds a vacuum, window cleaner and ice cream maker.
A resident of an Edwardian London flat has turned an unused fireplace opening into concealed kitchen storage using a curtain project that cost about £12. The simple setup hides a vacuum cleaner and other bulky appliances in a kitchen where existing cupboard space is limited.
Get the little things that make your day delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
The opening had become a box-shaped dead zone, with the original fireplace removed and its mantel surround remaining. Rather than leave the space unused, the resident fitted a 40–70cm tension rod bought from Dunelm for £4, avoiding the need to drill into the wall.
For the curtain, the resident repurposed a piece of leftover Linwood fabric. Hemming tape from John Lewis cost £3.25, and a pack of curtain rings with clips cost £3.60. The fabric was trimmed, folded over the tape and ironed; the clips attached it to the rod without the need to sew a rod pocket. The account says the fabric was left to cool for ten minutes and that the full project took about 30 minutes.
The space now holds a folding Shark vacuum, a Karcher window vacuum used to clear condensation from single-glazed windows, and a Ninja Creami ice cream maker. The resident said the appliances were awkward to fit into cupboards or leave on the worktop. The reported £12 total reflects the listed purchases, with the fabric already on hand.
A dead kitchen zone, turned into hidden storage
A resident in an Edwardian London flat used a simple curtain to hide bulky appliances in an unused fireplace opening.
The simple setup
The curtain conceals appliances without adding a cabinet or drilling into the wall.
A 40–70cm rod sits in the opening without drilling.
Hemming tape finishes leftover fabric; clips attach it to the rod without sewing.
The opening now holds a folding Shark vacuum, a Karcher window vacuum and a Ninja Creami.
What the listed spend covers
The stated total reflects the purchases; the fabric was already on hand.
| Item | Cost |
|---|---|
| Tension rod | £4 |
| Hemming tape | £3.25 |
| Curtain rings with clips | £3.60 |
Check the fit first
A similar setup depends on the opening and the materials available.
- Measure the opening and check the rod’s width range.
- Choose fabric and clips suited to the space.
- Buying fabric separately could raise the cost.
A Low-Cost Fix for Bulky Appliances
The project offers a way to use an awkward opening without adding a cabinet or making permanent changes. A tension rod requires no drilling, while clips and hemming tape reduce the sewing involved. That may make this approach useful for people who want to conceal appliances but have limited storage or are reluctant to alter a wall.
The trade-off is that a curtain conceals items rather than protecting them inside a closed cupboard. How practical it is will depend on the opening’s size, the rod’s fit and the weight of the fabric and clips. The account presents this as one household solution, not a tested storage product or a guaranteed fit for every fireplace or kitchen.
Products Worth Considering

Bose Home Speaker 500 Smart Speaker with Alexa, Black

Roborock Q7 M5+ Robot Vacuum and Mop with Self-Emptying Dock

LG OLED evo C4 55-Inch 4K Smart OLED TV (OLED55C4PUA) with 144Hz Refresh Rate, HDMI Cable, 24-Month Protection Plan, and Streaming Bundle
As an affiliate, we earn on qualifying purchases.
From Fireplace Opening to Storage
The account describes the flat’s kitchen storage as tight and the fireplace as an unused, cabinet-sized space. It places the project within a wider renewed interest in cupboard and sink curtains, which can hide stored items while adding colour or pattern to a room. The technique itself is longstanding, rather than a new invention.
Other possible locations mentioned include the gap under a worktop, the space above kitchen cabinets and an awkward ledge over a doorway. The account also notes that a ready-made cupboard curtain or a repurposed tea towel could be alternatives. Here, using fabric already available helped keep the stated outlay to the cost of the rod, tape and clips.
Costs and Fit Depend on the Space
The account gives a total of about £12 based on the listed purchases, but does not state whether the figure includes tax, delivery or other incidental costs. It also does not provide measurements for the fireplace opening or explain how the rod fits against the mantel, so the installation cannot be assumed to work in every space.
The fabric was leftover material, meaning someone starting without suitable fabric may face a higher total. No independent assessment is provided of how securely the rod holds over time, how much weight the concealed storage can accommodate or whether the arrangement affects ventilation around the appliances.
Adapt the Setup to Your Opening
The project is already complete; no further work or follow-up is specified. Anyone considering a similar curtain would need to measure the opening, check the tension rod’s stated width range and choose a fabric and clips suited to the space. The account’s next practical step was simply to arrange the items behind the curtain.
For readers without spare fabric, the account identifies a ready-made cupboard curtain or a tea towel as possible alternatives, though it does not give updated prices for those options. The reported cost and timing should be treated as the experience of this particular project, not a fixed estimate for other kitchens.
Source: rss
Key Questions
What did the curtain storage project cost?
The account puts the cost at about £12: £4 for a tension rod, £3.25 for hemming tape and £3.60 for curtain clips. The fabric was leftover material, so buying fabric separately could raise the total.
How long did the project take?
The resident says the project took about 30 minutes. The fabric was left to cool for ten minutes after ironing so the hemming tape could adhere.
What is stored behind the curtain?
The opening holds a folding Shark vacuum, a Karcher window vacuum and a Ninja Creami ice cream maker, according to the account.
Does this method require drilling or sewing?
The setup described uses a tension rod to avoid drilling and curtain clips to avoid sewing a rod pocket. Hemming tape was used to finish the fabric edges.
Source: idealhome.co.uk
